Kia Sedona 2008 User Manual download pdf (Page 86)

377

Features of your vehicle

4. Slowly allow the shoulder portion of

the safety belt to retract and listen for

an audible “clicking” or “ratcheting”

sound. This indicates that the retractor

is in the “Auto Lock” mode. If no distinct

sound is heard, repeat steps 3 and 4.

5. Remove as much slack from the belt

as possible by pushing down on the

child restraint system while feeding the

shoulder belt back into the retractor.

6. Push and pull on the child restraint

system to confirm that the safety belt is

holding it firmly in place. If it is not,

release the safety belt and repeat

steps 2 through 6.

7. Double check that the retractor is in

the “Auto Lock” mode by attempting to

pull more of the safety belt out of the

retractor. If you cannot, the retractor is

in the “Auto Lock” mode.

To remove the child restraint, press the

release button on the buckle and then

pull the lap/shoulder belt out of the

restraint and allow the safety belt to

retract fully.

When the safety belt is allowed to

retract to its fully stowed position, the

retractor will automatically switch

from the “Auto Lock” mode to the

emergency lock mode for normal

adult usage.

MMSA3029 MMSA3030

WARNING - Auto lock

mode

The lap/shoulder belt automatically

returns to the “emergency lock

mode” whenever the belt is allowed

to retract fully. Therefore, the pre-

ceding seven steps must be fol-

lowed each time a child restraint is

installed.

If the safety belt is not placed in the

“Auto lock” mode, severe injury or

death could occur to the child

and/or other occupants in the vehi-

cle in a collision, since the child

restraint will not be effectively held

in place.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 338 339

Comments to this Manuals

Chrisgaf 25 Apr 2024 | 23:23:29

Hello, im noob :)