Kia Sedona 2008 User Manual download pdf (Page 122)

3 113

Features of your vehicle

Calibration procedure

The compass may not indicate the cor-

rect compass direction when you are dri-

ving in certain areas (tunnel, parking

garage, underground parking lot, near

transformer substation, etc.), and the fol-

lowing may occur:

• The compass headings become inac-

curate.

• The compass heading doesn't change

when the vehicle changes direction.

• Some compass headings are not dis-

played.

• The compass headings are inaccurate

in long distance driving.

If the vehicle's compass headings

become inaccurate continuously, the

compass should be manually calibrated

as follows:

1. Move the vehicle away from any large

steel structures or power generating

cables or equipment.

2. Check the terrestrial deviation angle

value by pressing and holding the

MODE button for 4.5 seconds until the

current terrestrial deviation angle

value appears in the display.

3. If the terrestrial deviation angle value

is different for your country, set the cor-

rect angle referring to “Setting the

compass zone” and perform the

“Calibration procedure” again.

4. Make sure the vehicle windshield

wipers are turned off.

5. Press and hold the MODE button

again for 2~4.5 seconds until the “turn”

appears and “DIR” blinks in the display

and release the button.

6. Drive your vehicle in at least 1 com-

plete (either clockwise or counter-

clockwise) circle at less than 5 km/h (3

mph) within 10 minutes until the com-

pass heading appears.

7. If the vehicle’s compass headings

become inaccurate again, repeat

steps 1 through 6 above.

✽

NOTICE

If you press the MODE button before

the calibration is completed or the vehi-

cle is not rotated within 10 minutes after

“turn” appears and “DIR” blinks, the

correction will be cancelled.

1VQA2316

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 338 339

Comments to this Manuals

Chrisgaf 25 Apr 2024 | 23:23:29

Hello, im noob :)