Kia Sedona 2008 User Manual download pdf (Page 123)

Features of your vehicle

1143

Setting the compass zone

This compass must be set to compen-

sate for the variation between true north

and magnetic north. To set variation:

1. Find your current location and terres-

trial deviation angle value on the zone

map.

2. Press and hold the MODE button for

4.5 seconds. The current terrestrial

deviation angle value will appear in the

display.

3. Release the MODE button and press

the RESET button repeatedly until the

correct terrestrial deviation angle value

for your location appears in the display.

4. Press and hold the MODE button for

more than 1 second, and then the dis-

play will show a compass direction.

✽

NOTICE

If you press the MODE button for less

than 1 second before new compass zone

is set, the correction is cancelled.

Also, if the correction is not completed

within 30 seconds, the current terrestri-

al deviation angle value will blink for 2

seconds and the correction is cancelled.

✽

NOTICE

1. Do not install a ski rack, antenna, etc.

that is attached to the vehicle using a

magnet as anything attached to the

roof of the vehicle with a magnet will

effect compass operation.

2. If the compass deviates from the cor-

rect indication after repeated adjust-

ment, have the compass checked at an

authorized dealer.

3. The compass may not indicate the

correct compass point in tunnels or

while driving up or down a steep hill.

(The compass returns to the correct

compass point when the vehicle moves

to an area where the geomagnetism is

stabilized.)

1VQA2317

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 338 339

Comments to this Manuals

Chrisgaf 25 Apr 2024 | 23:23:29

Hello, im noob :)