Kia Rondo 2014 User Manual download pdf (Page 194)

4107

Features of your vehicle

Windshield wipers

When the wiper blade is not in a nor-

mal position, place the ignition switch

in the ON position. The wiper blade

will return to the normal position.

Following are cases a wiper blade

may be in an abnormal position.

- The wiper blade may be positioned

abnormally when in an automatic

vehicle wash. (Ignition switch in the

OFF position)

- The wiper blade may be positioned

abnormally when moved by force.

- The passenger's side wiper is on

top of the driver's side wiper.

(Normal position : The driver's side

wiper must be on top of the pas-

senger's side wiper.)

When there is a problem with interface

to be connected to driver's motor, the

wiper blades activate the Fail Safety

Function in the ignition switch ON or

within few minutes after ignition switch

OFF or while driving. Fail Safety

Function will operate as follows:

- HI or Mode 2 (5 minutes) → LO or

Mode 1 (5 minutes) → INT or Mode

--- (5 minutes) → OFF or O (Stop)

✽✽

NOTICE

If the problem remains, have the

system be checked by an authorized

Kia dealer.

• In a rainy day if the windshield glass

gets dry when driving through a long

tunnel, the wiping velocity may

reduce to protect the motor and

blade. It will return to its normal state,

after passing through the tunnel.

• Wiper blade can be moved upward

by wind pressure during driving

high speed. It is to protect the wrong

with motor. In case of occuring the

situation, operate wiper blades.

Wiper blade may operate normally

and be positioned normally.

■ Normal position

■ Abnormal position ■ Abnormal position

■ Ignition switch is ON

■ Normal position

ORP072060

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 516 517

Comments to this Manuals

No comments