Kia Rondo 2014 User Manual download pdf (Page 210)

4123

Features of your vehicle

System operation

Ventilation

1. Set the mode to the position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

Heating

1. Set the mode to the position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

5. If dehumidified heating is desired,

turn the air conditioning system (if

equipped) on.

• If the windshield fogs up, set the

mode to the position.

Operation Tips

• To prevent dust or unpleasant

fumes from entering the vehicle

through the ventilation system,

temporarily set the air intake con-

trol to the recirculated air position.

Be sure to return the control to the

fresh air position when the irritation

has passed to keep fresh air in the

vehicle. This will help keep the driv-

er alert and comfortable.

• Air for the heating/cooling system

is drawn in through the grilles just

ahead of the windshield. Care

should be taken that these are not

blocked by leaves, snow, ice or

other obstructions.

• To prevent interior fog on the wind-

shield, set the air intake control to

the fresh air position and fan speed

to the desired position, turn on the

air conditioning system, and adjust

the temperature control to desired

temperature.

Air conditioning (if equipped)

Kia Air Conditioning Systems are

filled with environmentally friendly

R-134a refrigerant.

1. Start the engine. Push the air con-

ditioning button.

2. Set the mode to the position.

3. Set the air intake control to the

recirculated air position. However,

prolonged operation of the reticu-

lated air position will excessively

dry the air. In this case, change the

air position.

4. Adjust the fan speed control and

temperature control to maintain

maximum comfort.

• When maximum cooling is desired,

set the temperature control to the

extreme left position, set the mode

control to the MAX A/C position,

then set the fan speed control to

the highest speed.

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 516 517

Comments to this Manuals

No comments